Välkommen till ThermoProbe – Portabel mätutrustning för petroleum, bulkvätskor och laboratorieanvändning

Display:	LCD with 0.25 inch characters Trend Indicating Arrows Low Battery & Fault indication
User Functions:	Manual shut-off if desired Lowest Reading, Highest Reading, Average Reading Switchable in Units of °F or °C
Construction:	Stainless Steel temperature sensor; standard lengths 8”, 21cm with narrow sensing tip. Sturdy composite frame surrounding aluminum enclosure Electronics and display in 3.5” x 1.2” anodized Aluminum enclosure Molded Silicone seal. Highly durable display window, graphics and membrane switches.
Weight:	6.5 ounces, 180 grams
Temperature:	-44 to 600 °F, -43 to 315 °C. Complete Range 0.01 Degree Resolution, +0.1 °F Accuracy below 200°F and +0.2 °F above 200°F +0.07 °C Accuracy below 100°C and +0.15 °C above 100°C
Temperature Response:	32 to 200 °F in 25 seconds, water bath.
Electronics:	Microcontroller and precision 20 bit A/D Converter FLASH memory Minimum ambient temp dependant on battery condition maximum ambient temp. 75 °C 100 Ohm, Class A Platinum RTD, 0.05%/yr max. drift
Battery:	Two AAA size batteries for extended service
Options:	Stem length to 39”, 1 m. Custom lengths available. Separate probe with high temp PFE cable Certification by independent calibration laboratory
Future:	Intrinsically Safe Certification Serial Cable and User Software NASA Licensed Software Algorithm for fast response.